How our SST transformers and grid equipment perform in mining, utility, industrial and renewable projects around the world.
SST-based distribution feeding underground mining equipment with clean, regulated power and harmonic protection.
Prefabricated 110 kV substation replacing aging equipment — delivered and commissioned in 90 days.
SVG + APF installation cutting THD below 3% and stabilizing voltage for production-line drives.
Containerized BESS and PCS delivering stable 24/7 power for a remote off-grid mining community.
SST-enabled hybrid microgrid integrating diesel, solar and storage for continuous mine operations.
High-efficiency SST feeding a colocation data center with DC interconnection and UPS-less backup architecture.
Background: A coal mine expansion required a compact, high-reliability power supply for new underground equipment, with limited space for conventional transformer rooms.
Solution: A 3 MVA SST solid state transformer providing regulated output, harmonic filtering and bidirectional operation, delivered in a skid-mounted enclosure.
Result: Installation completed in days instead of weeks; voltage stability improved and harmonic issues on the underground network were eliminated.
Discuss Your ProjectBackground: An aging 110 kV substation needed replacement without long outages for the local grid.
Solution: A prefabricated modular substation, fully assembled and factory tested, shipped in containers and installed on prepared foundations.
Result: Energized 90 days from order — roughly 70% faster than conventional construction — with a complete test dossier handed over at commissioning.
Discuss Your ProjectBackground: Heavy rolling-mill drives caused voltage dips and harmonic distortion affecting production quality.
Solution: A combined SVG + APF system sized to the plant load profile, with fast dynamic response.
Result: Total harmonic distortion reduced below 3%, power factor corrected to 0.99, and production-line trips eliminated.
Discuss Your ProjectBackground: A remote mine community relied on diesel generation with high fuel cost and frequent outages.
Solution: A containerized solar-plus-storage microgrid with BESS and EMS, including black-start capability.
Result: Diesel consumption cut by more than 60% while power availability rose to 99%+.
Discuss Your ProjectBackground: An off-grid copper operation wanted to integrate solar and storage without disrupting sensitive process loads.
Solution: SST-based microgrid controller providing seamless islanding, voltage regulation and load balancing.
Result: Renewable penetration increased to 40% with no impact on process stability.
Discuss Your ProjectBackground: A colocation provider sought higher power efficiency and space savings for its new hall.
Solution: High-efficiency SST units feeding IT loads with DC bus interconnection, removing redundant conversion stages.
Result: End-to-end efficiency above 98% and a significantly smaller equipment footprint.
Discuss Your Project